Accessories
for circuit board holder
WBH3000 / WBH3000S:
Accessories
for WHA3000P and WHA3000V
1)
Adjustable circuit board stop.
Order No. 0058754873
Stand
for hot air nozzles
2)
Support for large-dimensioned
circuit boards.
Order No. 0058755745
3)
Circuit board clamp.
Order No. 0058755741
4)
Clamping set for irregular shaped
circuit boards (mobile phones,
video/digital camera boards etc.).
Order No. 0058754924
The
stand has space for up to six hot air
nozzles and facilitates nozzle change
even when parts are hot. The nozzle
is secured in the holder by means of
a clamping device. When the clamping
screw is loosened, nozzle and iron can
be separated easily. The nozzle remains
in the holder. The hot air iron can
now be pushed onto another nozzle in
the holder; simply tighten the clamping
screw and the nozzle change is complete.
The risk of burning hands or material
is minimized.
Accessories
for WHA3000P and WHA3000V
Manual
control panel The hot air and vacuum can be
activated via the manual control panel
if, for example, the machine cannot
be reached conveniently. For connection
to WHA3000P / WHA3000V.
Order No. 0058736780
Nozzle
change tool This
tool is required to change the nozzles
when they are hot. It is part of the
equipment supplied with the hot air
stations WHA3000P / WHA3000V and WHA300.
Order No. 0051504999
External
sensor Type K. For precise "on-the-spot"
temperature measurement. For connection
to the hot air stations WHA3000P or
WHA3000V or to the pre-heating plate
WHP3000.
Order No. ? 0.25 mm: 0058754951
Order No. ? 0.50 mm: 0053119099
